Skip to content
Canadian & international orders may have added tariffs, duties, and shipping. Click to Learn More.
Canadian & international orders may incur additional fees. Learn More.
CAN controller to install inside your attachment

CAN Controller | 7 Pin (6 Output Deutsch Kit) Controller For Bobcat® Loaders, Toolcat & Versahandler - 6 Port | SG-CAN60-XX | Skid Steer Genius

by Skid Steer Genius
$900.00 - $1,290.00
$1,085.00
$1,085.00
$900.00 - $1,290.00
$1,085.00
Description

CAN60 Genius Controller for Bobcat® 7 Pin to 2 Pin Deutsch Attachments

Introducing the new CAN60 Genius Controller for Bobcat® 7 pin machines running 2 pin Deutsch equipped attachments. Install this directly on your attachment so it is not hanging on the boom.

An extension harness is required if you want it to reach your hydraulic control block, and it can be found here.

This product is sold as a kit, allowing you to order the necessary parts for your specific configuration. The stock kit ships with the extension harness by default. You must opt out of this harness if you do not need or want it.

The CAN60 is a true Genius Controller specifically designed for 12 volt solenoid controls. This adapter connects seamlessly to any Bobcat® 7 pin connector, allowing operators to control up to six 12 volt solenoids directly from the stick controls of their Bobcat® machines. It is compatible with Bobcat® skid steer loaders, as well as Toolcat and Versahandler machines.

The CAN60 features a six output configuration with 6 x @QP Deutsch connectors so you can plug in directly to your attachment solenoids for a clean, reliable installation.

CAN60 Features

  • Software compatibility with all Bobcat® machines, including Pilot Control, Hand and Foot Control, Toolcat, Versahandler, and imported Bobcat machines from the Czech Republic.
  • Durable molded plastic housing with enhanced cable retention, no more resin.
  • Cable retention design allows connectors to detach first during accidents, making repairs easier.
  • Equipped with two 125 pound magnets for secure mounting to your machine frame in various locations.
  • Improved temperature tolerance for both high and low extremes.
  • 9 amp output per channel, regulated to a maximum of 15 amps to protect your machine fuse.
  • Two channels can be programmed to latch (C and D or A1 and A2).
  • Simplified latching programming for user convenience.
  • User friendly LED output for clear visibility of controller status.
  • Additional output protection against unreliable solenoids commonly found in overseas manufactured attachments.

Outputs Include

A1 / A2

Wire Color: A1 (Green) / A2 (Orange)
Operation: Programmable momentary or latching

B1 / B2

Wire Color: B1 (White) / B2 (Red)
Operation: Momentary operation only

C1 / C2

Wire Color: C1 (Blue) / C2 (White and Black)
Operation: Momentary operation only

Show full description +
Technical Information

Installation:
The installation process takes approximately one minute and is 100% plug-and-play. This boom-mount configuration enables repeated use across any attachment with up to six solenoids. The adapter is fully assembled and ready for direct connection to any Bobcat® branded machine. It includes power, communication features, and a port status indicator LED to confirm operational status and command reception from the Bobcat® machine.

Upgrade from the inferior control boxes supplied by manufacturers and transition to reliable machine controls!

User Manual
Disclaimer

This product is not an authorized Bobcat® product and is not endorsed by Bobcat®. Under no circumstances should this product be construed as a Bobcat® product. This product is optically isolated from the control systems of your machinery and is designed to prevent any potential damage to your machine or its controls. The use of this product is deemed safe and will not cause any harm.

In the event that a dealer asserts that the use of this product will result in the voiding of your warranty or damage to your machine, we encourage you to report such claims to us immediately.

Skid Steer Genius is a specialized controls company dedicated to ensuring compatibility of products with a wide range of machinery. It is our objective to facilitate the use of any product purchased for your machine across various models. Certain manufacturers may design their products, and their associated controls, in a manner that restricts this compatibility.

Bobcat®, the Bobcat logo, and the color schemes associated with Bobcat machines are registered trademarks of Bobcat Company in the United States and in various jurisdictions worldwide. Bobcat Company operates as a subsidiary of Doosan Infracore Bobcat Holdings Co., Ltd., which is wholly owned by Doosan Infracore Co., Ltd.

All rights reserved.

Videos

#173 - CAN60 Controller Introduction for Bobcat Loaders