PLEASE READ! This is a specialty harness that in conjunction with our SG-ASW-200 controller will allow you to add up to 4 additional controls to your machine.
Just plug one end into your 14 pin equipped Bobcat, Kubota, Case, Takeuchi, New Holland, JCB/Volvo, Yanmar, Gehl or Mustang Loader and plug the pig tail into the ASW controller and you will now have up to 10 functions * with two of them being locking. This is all output through an industry standard wired 14 pin connector. The following outputs are added to your existing 14 pin connection when you use this harness.
A & P - Latching
M & N - Momentary
You can re-pin the outputs for specialty operations using the supplied pinning tool.
This is another Genius product. The best ideas at the best prices.
*Note: Does not work with John Deere without machine connector modifications or Cat D series completely. See notes below.
John Deere Notes: If you want to use this on a John Deere machine, you must move the ground pin in the machine harness from A to B.
CAT D-Series Notes: Use of this adapter will work with Cat as long as you understand the following. Pin K will not be +12 volts because Cat uses that pin as a ground sense for high flow operation. Pin A will be operated from our switch panel and not the machine control.
Note: Most machines provide a 14 Pin output with 6 switched ports. Some manufacturers make you order them and pay separately. We have no idea how you ordered your machine. It is your responsibility to make sure you have enough buttons installed in your machine for this adapter to work for your specific application.
